You are here: Home Solutions Home Communication CAT5 Camera Sequencer
CAT5 Camera Sequencer PDF Print E-mail
SOLUTIONS - Intercom Systems
P-6014 CAT 5 Camera Sequencer


The P-6014 is a 4 input 2 output camera sequencer and switcher for Channel Vision’s 6210 color CAT5 cameras (sold separately). Easily view any of the cameras simply by letting them sequence through the screen automatically or by pressing a button on the optional remote control. The RS-232 interface as well as audio/video loop out connections make it easy to integrate the P-6014 into any security system -  from basic to the most complex.

The 6210 camera was specifically designed to work together with the P-6014. A single CAT5 cable provides power to the camera and delivers video and audio signals back to the sequencer. These audio/video signals are output through the monitor connection on the P-6014.

Basic Application
The primary function of the P-6014 is to sequence through its 4 camera inputs. The time adjust control determines the length of time each camera view is shown before switching to the next camera view. Unless the RS-232 or IR remote control features are used, the P-6014 will remain in the auto cycle mode. If only three of the four inputs have an active video signal, only the three active camera inputs will be shown where in the auto cycle mode.






 
The only answer to Modulating and combining with digital cable!

Link - P-0328
Combine your modulator with digital cable tv and never lose a channel. Call the Factory for more information 800/840-0288