| In-Ceiling Speakers |
|
|
|
| Solutions - In-Wall and Ceiling Speakers |
|
Installation: • Use the provided template to mark and cut a ” hole in drywall away from ceiling joists. • We recommend wiring with AWG 16 or larger, stranded wire. • For proper phasing, both speakers must be wired alike. Connect red wires to red terminals on the speakers and to red or plus terminals on the amplifier. • Install IC812 in the hole. Tighten the mounting screws. The mounting “dogs ears” will rotate outward and grip the drywall. DO NOT OVER TIGHTEN the screws. A battery operated drill on a “low clutch” setting is recommended. • Aim tweeter • To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision VC-302. Installation: • Use the included template to mark and cut an 9.5” hole in drywall away from ceiling joists. • We recommend wiring with AWG 16 or larger, stranded wire. • For proper phasing, both voice coils must be wired alike. Connect red wires to red terminals on speaker and to red or plus terminals on amplifier. • Install ID850 in hole. Tighten the mounting screws. The mounting dog ears will rotate outward and grip the drywall. • Aim tweeters • To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision VC-302. ![]() Installation: • The OS610 may be mounted vertically or horizontally. • The OS610’s case is weather resistant and made with UV stabilized ABS. But for longest life, we recommend placement in a protected area, such as under an eave. • We recommend wiring with AWG 16 or larger, stranded wire. • For proper phasing, both speakers must be wired alike. Connect red wire to red terminal on speakers and to red or plus terminal on amplifier. • To control the volume of the speakers locally, use an impedance matching volume control, such as the Channel Vision VC-302. ![]() |